Permanent Settings In Programming Mode - Jura X8 Instructions For Use Manual

4 Permanent settings in programming mode

4 Permanent settings in programming mode
J WARNING
Program Sub-item
item
'1/5' 'Clean',
'Descale',
'Clean the milk
'Filter'
'2/5' 'Rinse the milk
'Rinse the coffee
'Information'
'3/5' 'Expert mode'
'Customise cup fill volume'
'One-off settings'
'Lock/enable'
'4/5' 'Choose language'
'Units'
'Rinse the milk system'
'Switch off after'
'Water hardness'
22
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the ' Pc '
navigate through the program items and permanently save the
required settings using the multi-function buttons. The following
settings can be made:
system',
(only if filter is fitted)
system',
system',
button to enter programming mode. You can
Explanation
T Here you can start the required maintenance
program or find out what maintenance actions
are required.
T Select your settings for specialty coffees and hot
water.
T Disable the function 'Permanently setting the
amount of water for the cup size'.
T Specify whether or not to allow one-off settings
during preparation.
T Enable or disable individual products.
T Select your language.
T Select the unit for the amount of water.
T Change the setting for the milk system rinsing.
T Set the time after which the X8 should switch
off automatically.
T Adjust the water hardness.