Adjusting The Product Settings - Jura X8 Instructions For Use Manual

Program Sub-item
item
'5/5' 'Product
'Day
'Maintenance
'Version'
'Connect
'Disconnect accessories'
displayed if the JURA Smart
Connect is being used.)
Adjusting the product
settings
J WARNING
Product
'Ristretto',
'Espresso'
'Coffee',
'Special'
'Cappuccino',
'Caffè latte',
'Flat White'
counter',
counter',
counter',
accessory',
(Only
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
In the program item
settings for all specialty coffees and hot water. The following
permanent settings can be made:
Coffee Amount
strength
10 levels Water: 0.5 oz – 2.5 oz
(15 ml – 80 ml)
10 levels Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
10 levels Water: 0.5 oz – 8.0 oz
(25 ml – 240 ml)
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
4 Permanent settings in programming mode
Explanation
T Keep track of all products prepared and view the
number of maintenance programs performed.
T Connect the X8 to a compatible accessory via
Bluetooth or disconnect the connection again.
'3/5' / 'Expert mode'
More settings
Temperature (normal, high),
position
Temperature (normal, high),
position
Milk and milk foam temperature,
Temperature (normal, high),
position
you can make individual
23