Subscribe to Our Youtube Channel
Related Manuals for Jura X6
Summary of Contents for Jura X6
- Page 1 X6 Instructions for Use Original instructions for use Before using the machine read the instructions for use. JURA Type 743...
-
Page 2: Table Of Contents
Important information Proper use ..............................6 For your safety ............................... 6 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the bean container ...........................10 Determining the water hardness ......................10 First-time use ..............................11 Connecting an accessory (via Bluetooth) ....................14... - Page 3 CAUTION draws your attention to potential damage to the machine. Symbols used Prompt to take action. This symbol means that you are being prompted to perform some action. Information and tips to make it even easier to use your X6. ‘Coffee’ Display...
-
Page 4: Control Elements
Control elements Control elements Cover On/Off button Q Filler funnel for cleaning tablet Grinder adjustment wheel Bean container with aroma preservation cover Height-adjustable coffee spout (lockable) Insert for drip tray Water tank cover (lockable) Cup grille Water tank Drip tray Hot-water spout Mains cable (permanently connected or plug-in) (back of the machine) - Page 5 Control elements Display Multi-function buttons (button function depends on what is shown in the display) Back of the machine: Service socket for JURA Smart Connect (behind cover) Spanner for aroma preservation cover, water tank cover and grinder adjustment wheel...
-
Page 6: Important Information
Keep these instructions for use close to the machine and pass them on to the next user. The X6 may only be operated by instructed per- sons. Non-professionals must be supervised dur- ing use. - Page 7 JURA or from authorised JURA service centres. Make sure that the X6 and the mains cable are not located close to hot surfaces. Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges.
- Page 8 Do not immerse the X6, mains cable or con- nections in water. Do not put the X6 or any individual parts in the dishwasher. Before cleaning, switch the X6 off with the On/ Off button.
- Page 9 Important information Do not allow children to play with the machine. Keep children under the age of 8 away from the machine, or supervise them constantly. Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely.
-
Page 10: Preparing And Using For The First Time
Setting up the machine When setting up your X6, please note the following: Place the X6 on a horizontal surface that is not sensitive to water. Choose a spot for your X6 which protects the machine against overheating. -
Page 11: First-Time Use
First-time use When using the machine for the first time, you can choose whether you want to operate X6 with or without the CLARIS Pro Smart filter cartridge. As well as limescale, the filter cartridge filters many other substances that impair aroma and flavour out of the water. These substances may negatively affect the coffee. - Page 12 ‘Saved’ appears briefly on the display. ‘Filter operation’ E Now decide whether you want to operate your X6 with or without a CLARIS Pro Smart filter cartridge. Operation with filter cartridge: go straight to the next section. Operation without filter cartridge: see Chapter 1 ‘Preparing and using for the first time –...
- Page 13 Rinsing of the filter stops automatically. ‘System is filling’ ‘Machine is rinsing’ The rinse stops automatically. Your X6 is ready for use. E The start screen shows the products you can prepare. Press ‘ T ’ button to display more products.
-
Page 14: Connecting An Accessory (Via Bluetooth)
1 Preparing and using for the first time Connecting an accessory Your X6 is equipped with the JURA Smart Connect. This allows you (via Bluetooth) to connect the machine to a compatible JURA accessory via Blue- tooth. Precondition: The start screen is displayed. -
Page 15: Preparation
– and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialised dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –... -
Page 16: Permanently Setting The Amount Of Water For The Cup Size
‘Saved’ appears briefly on the display. The set amount of water for one coffee is permanently stored. Your X6 is once more ready for use. E You can alter this setting at any time by repeating the above procedure. E You can also permanently set the amounts for all single prod- ucts in programming mode (see Chapter 4 ‘Permanent set-... -
Page 17: Hot Water
The preset amount of water flows into the cup. Preparation stops automatically. T Close the cover. Hot water Your X6 allows you to prepare different variants of hot water: ‘Hot water’ ‘Hot water for green tea’ CAUTION There is a danger of scalding from hot water splashes. -
Page 18: Daily Operation
T Close the water tank cover. Switching on the machine T Place a receptacle under the coffee spout. T Press the On/Off button Q to switch the X6 on. ‘Machine is heating’ ‘Machine is rinsing’ The rinse stops automatically. The start screen is displayed. -
Page 19: Daily Maintenance
3 Daily operation Daily maintenance To ensure that you get many years of reliable service out of your X6 and to guarantee the optimum coffee quality, the machine requires daily maintenance. T Pull out the drip tray. T Empty the coffee grounds container and the drip tray. Rinse them both with warm water. -
Page 20: Permanent Settings In Programming Mode
‘Choose language’ T Select your language. ‘Units’ T Select the unit for the amount of water. ‘Switch off after’ T Set the time after which the X6 should switch off automatically. ‘Water hardness’ T Adjust the water hardness. ‘Connect accessory’... -
Page 21: Adjusting The Product Settings
4 Permanent settings in programming mode Adjusting the product In the programme item ‘2/4’ ‘Expert mode’ you can make individ- settings ual settings for all speciality coffees and hot water. The following permanent settings can be made: Product Coffee strength Amount Temperature ‘Ristretto’,... -
Page 22: Positioning Products On The Start Screen
4 Permanent settings in programming mode T Press the ‘Coffee strength’ button. ‘Coffee’ and the coffee strength are displayed. T Press the ‘ < ’ ‘ > ’ button to change the setting for the cof- fee strength. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. -
Page 23: Enable Or Disable One-Off Settings
4 Permanent settings in programming mode ‘Inactive’: The function ‘Permanently setting the amount of water for the cup size’ is deactivated. The amount of water cannot be adjusted to the cup size by pressing and holding the relevant preparation button. Example: Proceed as follows to disable the function ‘Permanently setting the amount of water for the cup size’. -
Page 24: Enable And Disable Products
Automatic switch-off By instructing your X6 to automatically switch itself off, you can cut down your energy consumption. If this function is activated, your X6 switches off automatically after the preset time following the last action on the machine. -
Page 25: Setting The Water Hardness
4 Permanent settings in programming mode Setting the water The harder the water is, the more frequently the X6 needs to be hardness descaled. It is therefore important to set the water hardness accu- rately. The water hardness was set when the machine was first used. You can change this setting at any time. -
Page 26: Query Counter Readings And Version
4 Permanent settings in programming mode E To display more languages, press the ‘ T ’ button (bottom right). T Press the button that corresponds to the language you want, e.g. ‘Deutsch’. ‘Gespeichert’ appears briefly on the display. ‘3/4’ T Press the ‘... -
Page 27: Maintenance
Inserting the filter Your X6 no longer has to be descaled if you are using the CLARIS Pro Smart filter cartridge. If you did not insert the filter cartridge the first time you used the machine, you can do this now as follows. -
Page 28: Changing The Filter
Changing the filter E Once the filter cartridge stops working (depending on the water hardness setting), the X6 will prompt you to change the filter. E CLARIS Pro Smart filter cartridges are available from special- ised dealers. -
Page 29: Descaling The Machine
Cleaning is now complete. Descaling the machine The X6 builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcifica- tion depends on the hardness of your water. - Page 30 If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out. T Clean up any splashes immediately. E The descaling programme lasts approximately 40 minutes. E JURA descaling tablets are available from specialised dealers. Precondition: ‘Decalcify machine’ is displayed. T Press the ‘ Pc ’...
-
Page 31: Cleaning The Bean Container
T Remove the water tank. T If you use a CLARIS Pro Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several... - Page 32 5 Maintenance T Empty the water tank and rinse it thoroughly. T If you use a CLARIS Pro Smart filter cartridge, insert this again. T Fill the water tank with fresh, cold water and reinsert the tank.
-
Page 33: Display Messages
(see Chapter 5 display lights up red. ‘Maintenance – Changing the filter’). ‘Clean machine’ The X6 is prompting you to T Perform cleaning (see Chapter 5 clean it. ‘Maintenance – Cleaning the machine’). ‘Decalcify machine’ The X6 is prompting you to T Perform descaling (see Chapter 5 descale it. -
Page 34: Troubleshooting
Q. Contact customer support in displayed. your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). -
Page 35: Transport And Environmentally Friendly Disposal
8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the Keep the packaging for your X6. It should be used to protect the system machine during transport. In order to protect the X6 from frost during transport, the system must be emptied. -
Page 36: Technical Data
9 Technical data 9 Technical data Voltage 220–240 V ~, 50 Hz Power 1450 W Ambient conditions Humidity max. 80 % Ambient temperature 10–35 °C Sound pressure level ≤ 70 dB Conformity mark Pump pressure static, max. 15 bar Holding capacity of water tank 5 l (without filter) Holding capacity of bean container 500 g Holding capacity of coffee grounds... -
Page 37: Index
10 Index 10 Index Descaling Machine 29 Addresses 40 Water tank 31 Adjusting the product settings 21 Disable Aroma preservation cover Products 24 Bean container with aroma preservation Display 5 cover 4 Display messages 33 Automatic switch-off 24 Disposal 35 Drip tray 4 Bean container Insert 4... - Page 38 10 Index Ristretto 15 Special coffee 15 Insert for drip tray 4 Problems Internet 10 Troubleshooting 34 Product counter 26 JURA Products Contact details 40 Disable 24 Internet 10 Enable 24 Product settings Adjusting 21 Language 25 Programming mode 20...
- Page 39 10 Index Technical data 36 Tel 40 Transport 35 Troubleshooting 34 Unit for amount of water 25 Use, First-time 11 Version 26 Water hardness Determining the water hardness 10 Setting the water hardness 25 Water tank 4 Descaling 31 Filling 18 Website 10...
-
Page 40: Jura Contact Details / Legal Information
J73146/X6/en/201705 11 JURA contact details / Legal information 11 JURA contact details / Legal information Your JURA service partner JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 www.jura.com Directives The machine complies with the following directives: 2006/42/EC – Machinery Directive 2014/30/EU –...
Need help?
Do you have a question about the X6 and is the answer not in the manual?
Questions and answers