Regular Maintenance; Switching Off The Machine - Jura X8 Instructions For Use Manual

Regular maintenance

Switching off the
machine
T Clean the milk system in the dual spout (see Chapter 5
'Maintenance – Cleaning the milk system').
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the dual spout (see Chapter 5
'Maintenance – Dismantling and rinsing the dual spout').
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfiber cloth).
You will find more information about caring for your X8 in
programming mode under
information').
Carry out the following maintenance actions regularly or as
required:
U
In the interests of hygiene, we recommend changing the milk
pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialized dealers.
U
Clean the inside of the water tank, e.g. with a brush. Further
information about the water tank is provided in these
instructions for use (see Chapter 5 'Maintenance – Descaling
the water tank').
U
Traces of milk and coffee may stick to the top and bottom of
the cup platform. If this happens, clean the cup platform.
When the X8 is switched off, the system is automatically rinsed if a
specialty coffee has been prepared. If milk has been prepared, you
will also be prompted to clean the milk system.
T Press the On/Off button Q.
E If milk has been prepared, you will be prompted to clean the
milk system ('Clean the milk system'
the milk system
process continues automatically.
If milk has been prepared but you have not started milk
system cleaning, the milk system is rinsed first
is being rinsed').
'Machine is rinsing', the system rinses itself. The operation
stops automatically. Your X8 is switched off.
'2/5' / 'Information' ('Maintenance
/ 'Do you want to clean
now?'). After 10 seconds the switch-off
3 Daily operation
('Milk system
21