Powering The Unit On, Off, And Troubleshooting - Filament Innovations BFP-ICARUS-TYPHOON Manual

Powering the Unit On, Off, and Troubleshooting

Your printer has come with the following tools and accessories:
Accessories
• Filament
• CW-3000 Water Chiller
• Desiccant Dryer for Filament Chamber
• Wyze IP/Internet WebCam
• PTFE Oil for Linear Rails
• White Lithium Grease for Ballscrews
The ICARUS printers run on 110 VAC power, standard USA household
electricity – the unit needs a 15A circuit for operation. The switches on the
front of the control box are responsible for turning on and off the printer.
As a reminder, the function of each control is listed below.
• Red Toggle Switch: Controls power to the printer (Red Arrow)
• Blue Toggle Switch: Controls internal LED lighting (Blue Arrow)
• Emergency Stop: Kills all power in case of emergency. If pressed, turn
the button clockwise to disengage. (Green Arrow)
• Main Power Plug: Plug for 110 VAC power cord. (Yellow Arrow)
FRONT REAR
12