Table of Contents
Advertisement
CW-3000 Water Chiller
The water chiller should be drained and fresh fluid added roughly every
three months. This will prevent any unwanted buildup from entering the
water chiller, the lines, and the Typhoon.
Typhoon Greasing
The Typhoon is an industrial FDM extrusion system, thus additional care
is needed, when compared to standard extruders and hotends. The
Typhoon has multiple gears that need white lithium grease applied to it
every three months. You can use the same white lithium grease for this
as we use for the ballscrews. We will be updating this manual with
pictures shortly
It is a great idea to do change the fluid in the water chiller and grease
the Typhoon gears, at the same time, every three months.
37
Advertisement
Table of Contents
