Filament Innovations BFP-ICARUS-TYPHOON Manual page 31

Start G-Code
M561 ; clear any bed transform
G28 ; home all
G32 ; check bed tilt
G29 ; mesh map
M116 S5 ; wait for hotend and bed to reach temperature to 5 degrees
End G-Code
M104 T0 S0 ; turn off extruder
M140 S0 ; heated bed heater off
G92 E0.0000
G1 E-2.5000 F2100
G91 ; relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle to release some of the
pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ; move Z up a bit and retract filament even moree
G28 X0 ; move X min endstops so the head is out of the way
G90 ; absolute positioning
M84; disable motors
; music for the successful print
M400 ; Empty the movement buffer
M300 P200 S1000
G4 P201
M300 P200 S1250
G4 P201
M300 P200 S1100
G4 P201
M300 P200 S2000
G4 P201
M300 P200 S1500
G4 P201
M300 P200 S1000
G4 P201
M300 P200 S1300
G4 P201
M300 P200 S1000
G4 P201
M300 P300 S1500
M400 ; Empty the movement buffer
31