Offline File Uploading And Printing - Filament Innovations BFP-ICARUS-TYPHOON Manual

Offline File Uploading and Printing

Every Touchscreen is equipped with a MicroSD port which allows for offline
printing. The following guide details how to print via this method.
Steps for Setting up Offline Printing
1) Acquire a MicroSD card (this is not
included, or an SD card with a MicroSD
to SD extender). Verify that the card is
formatted as a FAT32 by inserting it into a
computer and checking the properties
of the card. If it is not, format it as a FAT32
card.
2) Upload the desired .gcode file(s) from
Simplify3D to the SD card.
3) Plug the MicroSD card into the MicroSD
card slot on the bottom of the
touchscreen. When the card is inserted,
the metal contacts of the card should be
facing you.
If you are using an SD card and a
MicroSD to SD extender, plug the
extender into the printer and the SD card
into the other end of the extender.
4) Press the SD icon on the main screen of
the touchscreen. This will bring up the
files on SD Card 0, NOT the files on the
card that was just inserted.
5) Press the SD icon in the top left of the
screen to bring up the files on SD Card 1,
the MicroSD card that was just inserted
into the screen.
6) The screen should now display all the files
on the inserted MicroSD card. Choose a
file to print.
3
4
5
6
33