Table of Contents
Advertisement
Duet Web Control
The Duet Web Control is designed to allow users to monitor their printer
from an advanced web interface. After you connect the unit to the
internet, you will get an IP address, and this will be entered into a browser
to access the web interface. We recommend Google Chrome if you
have access to it. If your unit is connected to the internet and the IP
address entered is correct, you should see a screen like this on your
computer. Duet Web Control runs great on the Microsoft Surface.
To upload and start your first print is very easy. Once you have sliced your
STL file in Simplify3D and have generated your gCode file, select the
Upload & Start(yellow box in the picture above) button to upload your file
and your printer will automatically begin the printing process by heating
the system – homing – leveling the bed – and printing!
27
Advertisement
Table of Contents
