Installing The Microsoft Surface - Filament Innovations BFP-ICARUS-TYPHOON Manual

Installing the Microsoft Surface

Every ICARUS is included with a Microsoft Surface to perform on-board
slicing through Simplify 3D or control the printer through the Duet Web
Control. Every printer has an articulating arm mounted on the printer. The
following steps should be followed to mount the surface on the machine.
Mounting Microsoft Surface
1. Identify the location of the surface
mount. There should also be a
charging cable that comes out of the
side of the machine. Verify the keys to
lock the mount are also in the mount.
2. Verify that the mount is in the
unlocked position. The adjustable
slider should move freely.
3. Place the Microsoft Surface in the
mount using opposite corners of the
tablet.
4. Push the locking mechanism into
place, and turn the key to lock the
mount in this position.
5. Plug the charger into the side of the
Microsoft Surface. Turn the Microsoft
Surface on and follow the onscreen
instructions to set-up the device.
3
1
2
4
28