Sewing Data; Sewing Data List - JUKI AMB-289 Engineer's Manual

7. SEWING DATA

(1) Sewing data list

Sewing data are those that can be inputted to 99 patterns from pattern 1 to 99 and can be inputted to each
pattern. However, the sewing data that can be inputted differ according to the selected sewing method or
sewing shape.
No.
Sewing method
This item sets the sewing method.
: Sewing flat/wrapped-
: Sewing flat button
: Counter/stay
Stitch shape (sewing flat/wrapped-around button with blindstitch)
This item sets the stitch shape of sewing flat/wrapped-around button with blindstitch.
Stitch shape (sewing flat button directly to cloth)
This item sets the stitch shape of sewing flat button directly to cloth.
Stitch shape (sewing flat button with blindstitch)
This item sets the stitch shape of sewing flat button with blindstitch.
Stitch shape (counter/stay button sewing)
This item sets the stitch shape of counter/stay button sewing.
* Selection of the shape of lower button is performed with
.
Upper buttonhole interval (longitudinal)
This item sets the needle entry interval of
top feed.
Upper buttonhole interval (lateral)
This item sets the needle entry interval of
top feed.
Item
around button with
blindstitch
with blindstitch
button sewing
Settomg range
: Sewing flat button
directly to cloth
– – –
: Neck wrapping
– – –
– – –
– – –
– – –
0.10 to 6.00
0.10 to 6.00
– 107 –
Ddit unit Initia display Remarks
– – –
Sewing flat/
wrapped-
around
button with
blindstitch
– – – 4-hole button
without cross-
over stitches
(longitudinal)
– – – 4-hole button
without cross-
over stitches
(longitudinal)
– – – 4-hole button
without cross-
over stitches
(longitudinal)
– – – Front : 4-
holed button
without cross-
over stitches
(longitudinal)
Rear : 4-holed
button without
cross-over
stitches
(longitudinal)
0.05mm 3.60
0.05mm 3.60