Sewing Data List - JUKI DP-2100 Engineer's Manual

7. SEWING DATA LIST

This list is the list of sewing data to set for every pattern.
"Semi-automatic selection and fully-automatic selection"
No.
Selection of gents and ladies (Fully-automatic only)
Select from two kinds of gents and ladies.
: Gents
Shirring amount increase/decrease setting
Increase/decrease value of the shirring amount
of the whole of the pattern is set.
Sewing size setting (Fully-automatic only)
Sewing size is set. Here, the description is
in case of Japanese gents. Size value changes
in accordance with the country classes.
Sewing pitch setting
Pitch at the time of sewing is set.
Length between steps setting
(Fully-automatic only)
Length of each step is set.
Grading value setting
(Full-automatic only)
Offset value at the time of grading is set.
Compensation thread tension setting
Increase/decrease of thread tension value
in terms of the set value of needle thread
tension is set.
Compensation pitch setting
Increase/decrease value in terms of the
sewing pitch set with
Start position change
Start position of the program is changed.
Mirroring
Mirroring of the program of one sleeve is
performed and the program of the other
sleeve is created.
Item
: Ladies
is set.
− 73 −
Setting range Edit unit
– – – – – –
(Numerical
value input) 1
-50 to 50
(Ratio input)
-95 to 95 5%
2 to 16 1 size
1.5 to 6.0 0.1mm
1.0 to 255.0 0.1mm
0 to 255 0.1mm
-200 to 200 1
-4.5 to 4.5 0.1mm
1 to 15 1
– – – – – –
Initial display
Gents
0
0%
No. 5
In case of
Japanese
gents
2.0mm
Without
0mm
0
0mm
1
– – –