(2) Movable eye-guard
1. Assemble the movable eye-guard to face plate
(Refer to Parts List.)
2. Structure is as shown in figure C. Loosen setscrew
solenoid valve
supplied as accessories.
3. Perform the piping of air hoses
valve
.
so that the hoses follow the same route of the wiper and go to 5-port solenoid
Fig.A
with setscrews
and
of stopper block
Fig.C
– 118 –
as shown in the figure.
in figure B, and assemble 5- port
Fig.B