BAYKON BX11 Series User Manual page 34

[703 0] Output 4
Refer to Table 5-1 to select the output function.
0 : No function on output 4
1 : Threshold (Active High)
2 : Threshold (Active Low)
3 : Window (Active High)
4 : Window (Active Low)
5 : Fieldbus output
[704 0] Output 5
Refer to Table 5-1 to select the output function.
0 : No function on output 3
1 : Threshold (Active High)
2 : Threshold (Active Low)
3 : Window (Active High)
4 : Window (Active Low)
5 : Fieldbus output
Diagnostics
The tests and measuring below are available to find the error source.
RS 232C Serial Interface testing
Short circuit the RXD and TXD pins of the RS232 serial port. Access to the parameter [901].
The characters in the alphabet will be seen double on the display by pressing < Zero > key
sequentially.
RS 485 Serial Interface testing
Access to the parameter [902].The characters in the alphabet will sequentially be transferred
from RS 485 serial interface port by pressing < Zero > key one after another. Received
numerical data is also seen on display.
Parallel Inputs
Access to the parameter [903]. The prompt [ı X Y] appears on the display.
To perform parallel input test, enter the number of parallel input to Y digits via < Zero > key.
X shows the logical condition of that input.
BX11 Smart Process Indicator, User Manual, Rev. 1.8, May 2017
Page 32 of 48