Hold
The instrument holds the weight
indication during input signal which
help the measured value to the
operator for a while.
signal allows the basic weighing
operation.
Refer to parameter [131, 132, 133
and 134 ] on Page 30.
PLC remote port
The digital input of the weighing
instrument is used as a remote port of
the PLC if the input is programmed as
fieldbus port.
The instrument transfers the status of
the input port to the PLC after
receiving the related command. PLC
processes the received data as a
remote digital input port.
Refer to parameter [131, 132, 133
and 134 ] on Page 30.
Inputs connection diagram is shown in Figure 4.4.
BX11 Smart Process Indicator, User Manual, Rev. 1.8, May 2017
Low input
Figure 4.4
BX11 Inputs connection diagram
-
Page 15 of 48