BAYKON BX11 Series User Manual page 11

Example 2: Sorting or Checkweighing. if you want
checkweighing or sorting the items basically, you
may set the setpoints to Control mode-1. After
entering the sorting weights to SP1, SP2 and SP3 in
sequence, outputs will change as shown on the right.
Example 3: Producing alarm. if you want to produce
alarm signal between to weight values, e.g. between
200.0 and 300.0 kg , additional to your other cutoff
needs, you may set setpoint 5 to functional output
and active window. After entering SP5L = 200.0 and
SP5H=300.0, the digital output will be as shown on
the right to control valves, lambs etc.
Peak Hold
BX11 has ability to hold the peak of the loading during
the digital input active, if programmed. After applying
the digital input, the instrument follows the loading to
hold its peak and displayed weight / force increases
together with increasing loading. Holds the peak
following higher loadings as shown on the drawing.
Hold Displayed value
BX11 has ability to hold the displayed value during the
digital input active, if programmed. During the digital
input, the instrument holds the displayed value, even
the loading changes as shown on the drawing.
BX11 Smart Process Indicator, User Manual, Rev. 1.8, May 2017
Page 9 of 48