Digital Output Connection
BX11 instruments digital outputs are can be used as a standard, threshold and window. Threshold
and window outputs are also programmable positive or negative polarity. Digital outputs of BX11 are
also programmable as a fieldbus port to control them with a fieldbus commands. Refer to parameter
[ 117 ], [ 130 ] and [ 70- ].
Outputs connection diagram is shown in Figure 4.5 and Figure 4.6.
Outputs are 30 VDC, 1A.
Figure 4.5 - BX11 Outputs connection diagram
Non-isolated outputs are power supply voltage – 1.5V, 100mA. Connection diagram is shown in
Figure 4.6.
Figure 4.6 - Non-isolated outputs connection diagram
BX11 Smart Process Indicator, User Manual, Rev. 1.8, May 2017
Page 16 of 48