Table of Contents
Advertisement
Orange Wires
PCB
Green
Earth Wire
Pump and
Motor Assembly
Black Wire
(supplied loose)
On/Off
Microswitch
Pump and
Earth
Motor
PCB
Wire
Assembly
L
N
On/Off
Microswitch
42
42
42
42
42
Long Black
Wire
Potentiometer
Ensure wires are
neatly tucked
into V-Channels
Potentiometer
Section 10
8.4.
8.4.
8.4.
8.4.
8.4.
Disconnect and remove the old
PCB.
8.5.
8.5.
8.5.
Fit the shorter black wire of the
8.5.
8.5.
new PCB to the free rear motor
terminal.
8.6.
8.6.
8.6.
Fit the longer black wire of the
8.6.
8.6.
new PCB to one of the on/off
micro-switch terminals.
8.7.
8.7.
8.7.
8.7.
8.7.
Fit one end of the black wire that
is supplied loose to the free front
motor terminal and the other end
to the free on/off micro-switch
terminal.
8.8.
8.8.
8.8.
There is no change to the
8.8.
8.8.
connection of the orange wires to
the potentiometer.
8.9.
8.9.
8.9.
8.9.
8.9.
Position and secure the PCB and
reconnect the Earth wire.
8.10.
8.10.
8.10. Ensure all wires are neatly tucked
8.10.
8.10.
into the case V channels around
the motor & mixer assembly.
Advertisement
Table of Contents
