Shower Fittings - Mira Event Installation, Operation, Maintenance Manual

Flow knob
Cover
retaining
screw

2. Shower Fittings

2. Shower Fittings
2. Shower Fittings 2. Shower Fittings 2. Shower Fittings
Temperature
trim
Temperature
knob
Hose washer
Flexible hose
Section 6
1.14. 1.14. Refit the cover by locating the 1.14.
1.14. 1.14.
cover onto the tongue on the top
of the case. Push the bottom of
the cover against the case,
tighten the cover retaining screw,
refit the flow knob, temperature
trim and temperature knob.
Note! Note! The flow knob, Note!
Note! Note!
temperature trim and temperature
knob have
key-ways to ensure correct
alignment.
1.15. 1.15.
1.15. 1.15. This completes the installation of 1.15.
the Mira Event Mira Event Mira Event Mira Event. The appliance Mira Event
will now require to be
commissioned before connecting
the electrical supply. Refer to
"Commissioning: Priming the "Commissioning: Priming the "Commissioning: Priming the "Commissioning: Priming the "Commissioning: Priming the
Appliance" Appliance" Appliance" and "Adjustable
Appliance" Appliance"
Maximum Temperature Maximum Temperature
Maximum Temperature Maximum Temperature Maximum Temperature
Setting" Setting" Setting" Setting". Setting"
2.1. 2.1. To install the shower fittings 2.1.
2.1. 2.1.
refer to the appropriate section in the
Installation, Operation and
Maintenance Guide which
accompanies the fittings.
"Adjustable "Adjustable "Adjustable
"Adjustable
shower fittings, please shower fittings shower fittings
shower fittings
21 21 21 21 21