Table of Contents
Advertisement
Collets
Remove
screws 1 to 12
34
34
34
34
34
4.2.
4.2.
4.2.
4.2.
4.2.
4.3.
4.3
4.3
4.3
4.3
4.4.
4.4.
4.4.
4.4.
4.4.
Release tool
4.5.
4.5.
4.5.
4.5.
4.5.
4.6.
4.6.
4.6.
4.6.
4.6.
4.7.
4.7.
4.7.
4.7.
4.7.
Section 10
Disconnect the electrical supply
cable from the terminal block and
earth stud.
Remove the flexible hose from
the appliance.
Disconnect the electrical supply
cable from the terminal block and
earth stud.
Remove the flexible hose from
the appliance.
Remove the three wall fixing
screws,
Using the push-fit release tool,
push back and hold the collets
from the supply pipework, lift the
appliance from the wall to
remove the supply pipework from
the inlet manifold.
Remove the inlet manifold, mixer
assembly, pump saddle clamp
and on/off micro-switch retaining
screws. Remove the drip shield
the micro-switch and the pump
saddle clamp.
Advertisement
Table of Contents
