Intrinsyc Open-Q 626 mSOM Quick Start Manual page 2

Development Kit Setup
1. At a static-safe workstation, remove the development kit board
carefully from the anti static bag
2. If you do not have the optional LCD then connect the HDMI cable from
the development kit (#10) to an HDMI display.
3. Connect the Power Adapter to the 12V DC Jack (#6), then press and
hold the power button (#27) for approximately 3 seconds. If using the
LCD you will see the boot menu appear first, followed by the Intrinsyc
logo as the board boots up. If using HDMI the screen will remain blank
for approximately 45 seconds before the Android screen appears.
4. Documentation and software
To access the documentation (schematics, user guides, programming guides,
tech notes...), platform BSP software and much more, please register at:
http://tech.intrinsyc.com
™
Open-Q 626 µSOM Development Kit
Quick Start Guide
Specifications are subject to change - Open-Q 626 DK QSG rev 1.3
Development Kit Support
For more information or assistance, you can contact us at:
https://www.intrinsyc.com/contact-support
Intrinsyc also provides technical information and videos on Snapdragon
processors at:
http://www.intrinsyc.com/resources
Should you require additional technical support for your Development Kit you can
purchase a block of technical support hours from the Intrinsyc store:
https://www.intrinsyc.com/support
Thank you for purchasing the Open-Q 626 Development Kit
The Intrinsyc Team