Table of Contents
Advertisement
S
P
ERVICE
ROCEDURES
T
PASS
O PRINT IMAGE
PAGES
1 Make sure that the copier is not printing or processing files.
2 Turn on the copier and the imagePASS.
Wait for both the copier and the imagePASS to warm up.
3 On the copier touch panel, press Printer and then press Printer Server Status/Settings.
If Printer does not display, press Show All.
4 Press Functions.
5 Press Print Pages.
6 Select the page you want to print (for example, to print the Configuration page, press
Configuration).
T
O CHECK THE TEST PAGE
1 Print the PS Test Page (see
2 Examine the test page.
If the test page prints, you know at that the imagePASS print engine is functional and that the
connection between the imagePASS and the copier is operating properly. When you examine
the test page, consider the following:
• All swatches should be visible, even though they may be very faint in the lowest ranges.
• Swatches should show uniform gradation as the tone lightens.
• Poor image quality may indicate a need to calibrate the system or service the copier.
page
49).
49
Advertisement
Table of Contents
