Figure 21: Service Switch Position For Ethernet Crossover Cable Installation - Canon imagePASS-A2 Service Manual

Table of Contents

Advertisement

S
S
YSTEM
OFTWARE
4 In the installer, do the following:
• On the Welcome screen, click Next.
• On the License Agreement screen, select I Agree and click Next.
• On the Connection Type screen, select Ethernet and click Next.
5 Connect a Ethernet crossover cable from the network port to the computer (see
page 18).
6 Move both service switches to the ON position (see
ON
1 2
F
21:
Service switch position for Ethernet crossover cable installation
IGURE
7 Power on the imagePASS using the copier main power switch.
Wait for the LED display to display 00 .
8 In the installer, click Next.
Files are transferred from the computer to the imagePASS. If a firewall or security alert
displays, preventing the file transfer, select the option to unblock the installer.
This segment of the installation requires approximately 30 minutes. Do not click Cancel or
close the installer during this time.
9 Click Next and then click Finish.
Remove the System Software DVD.
10 Turn off the imagePASS using the copier main power switch.
11 Move both service switches to the OFF position (see
12 Disconnect the Ethernet crossover cable from the network port and the computer.
13 Reconnect cables and devices you removed earlier.
14 Turn on the imagePASS using the copier main power switch.
Wait for 00 to display on the LED display.
page
16).
Figure 4
on page 16).
55
Figure 5
on

Advertisement

Table of Contents
loading

Table of Contents