Checking Connections; Connector Panel; Figure 5: Connector Panel - Canon imagePASS-A2 Service Manual

Checking connections

1 USB Ports
2 Network port (see page 53)
3 Copier port
4 Copier interface port
5 Power switch
6 Power connector
7 Power supply vent
S P
ERVICE ROCEDURES
This section includes information about checking external connections between the
imagePASS, the copier, and network, and internal connections between imagePASS
components.
The most common cause of a hardware problem is a faulty or loose connection. Before you
replace a costly component, check internal and external connections (see

Connector panel

With the connector panel, you can connect the imagePASS to the copier and the network.
Upper side of the copier
1
2
3
4
5
6
Connector panel
F 5:
IGURE
7
18
page 23).