On Consignment Of The Machine Serial Number Plate; Introductory Comment; Technical Description - COMAC FLEXY 70BS Manual Use And Maintenance

On consignment of the machine
When the machine is consigned to the customer, an immediate check
must be performed to ensure all the material mentioned in the
shipping documents has been received, and also to check the
machine has not suffered damage during transportation. If this is the
case, the carrier must ascertain the extent of the damage at once,
informing our customer service office. It is only by prompt action of this
type that the missing material can be obtained, and compensation for
damage successfully claimed.

Introductory comment

This is a floor scrubber-dryer that is able to clean a wide variety of
types of flooring and types of dirt by using the mechanical action of
two disk or cylindrical brushes, depending on the model, and the
chemical action of a water-detergent solution. As it advances, it also
collects the dirt removed and the detergent solution not absorbed by
the floor.
The machine must be used only for this purpose. Even the best
machines will only work well if used correctly and kept in good working
order. We therefore suggest you to read this instruction booklet
carefully and re-read it whenever difficulties arise while using the
machine. If necessary, remember that our assistance service
(organised in collaboration with our dealers) is always available for
advice or direct intervention.

TECHNICAL DESCRIPTION

Working width
Squeegee width
Work capacity, up to
Cylindrical brushes (No. 2)
Cylindrical brush rotations
Cylindrical brush motor
Pressure on the brushes
Traction motor
Traction motor
Traction wheel
Movement speed
Maximum gradient with full load
Suction motor
Suction vacuum
Rear elastic wheels
Solution tank
Recovery tank
Steering diameter
Machine length
Machine height
Machine width (without squeegee) Tank
Battery compartment
Rated battery voltage
Battery capacity (C5)
Battery weight
Machine weight (empty and without batteries)
Noise level (in compliance with IEC 704/1)
Hand vibration level
Body vibration level
Serial number plate
UM FLEXY 70 BS
mm
mm
2
m /h
∅ mm
rpm
W 2 x 650
kg
V
W
∅ mm
km/h
%
W
mbar
∅ mm
303x90
l
l
mm
mm
mm
mm
mm 538x620xH460
V
Ah
kg
kg
dB (A)
2
m/s
2
m/s
4
FLEXY 85 BS
700 850
1015 1115
3500 4250
150 150
800 800
2 x 650
50 50
36 36
700 700
260 260
0÷5 0÷5
10 10
560 560
160 160
303x90
130 130
138 138
2450 2450
1700 1700
1530 1530
805 940
538x620xH460
36 36
320 320
345 345
405 410
<70 <70
0.71 0.71
0.74 0.74