Table of Contents
Advertisement
On consignment of the machine
When the machine is delivered to the customer, an immediate check
must be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not
been damaged during transportation. If this is the case, the carrier must
ascertain the extent of the damage at once, informing our customer
service office. It is only by prompt action of this type that the missing
material can be obtained, and compensation for damage successfully
claimed.
Introductory comment
The ULTRA100s are floor scrubbing machines which, by means of the
mechanical action of the rotating brush and the chemical action of a
water/detergent solution, can clean any type of flooring. As they advance,
they also collect any removed dirt as well as the detergent solution not
absorbed by the floor.
The machine must only be used for this purpose. Even the best
machines will only work well if used correctly and kept in good working
order. We therefore suggest you read this instruction booklet carefully
and read it again whenever difficulties arise while using the machine. If
necessary, remember that our customer assistance service (organised in
collaboration with our dealers) is always available for advice or direct
intervention.
Intended use
The scrubbing machine is designed exclusively for the professional
cleaning of surfaces and floors in industrial, commercial and public
environments. The machine is only suitable for use in closed (or at least
covered) places.
The machine is not suitable for use in the rain, or under water jets. It is
FORBIDDEN to use the machine in places with a potentially explosive
atmosphere, for picking up dangerous dusts or inflammable liquids. In
addition, it is not suitable as a means of transport for people or objects.
COMBUSTION ENGINE TECHNICAL DATA (HONDA iGX
440)
Type of motor
Bore per stroke
Displacement
Compression ratio
Net power
Maximum torque
Start-up
Starter (Choker)
Fuel cut-off valve
Tank capacity
Fuel consumption at rated power
Oil sump capacity
Dry weight
Serial number plate
UM
Single-cylinder OHC gasoline engine with horizontal shaft, Otto
cycle, 4-stroke, forced air cooling
88 x 72.1
mm
438
cm
3
8.1 : 1
9.5 - 3600
kW - rpm
29.8 - 2500
Nm - rpm
Self-winding / Electric
Automatic
Automatic
5.9
l
3.6 - 3600
l/h - rpm
1.1
l
39
kg
5
Advertisement
Table of Contents
