On Consignment Of The Machine; Serial Number Plate; Introduction; Intended Use - COMAC SIMPLA 50 B Use And Maintenance Manual

On consignment of the machine

Serial number plate

When the machine is delivered to the customer, an immediate check must
be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not
been damaged during transportation. If this is the case, the carrier must
ascertain the extent of the damage at once, informing our customer
service office. It is only by prompt action of this type that the missing
material can be obtained, and compensation for damage successfully
claimed.

Introduction

Simpla is a floor scrubbing machine which, by means of the mechanical
action of the rotating brush and the chemical action of a water/detergent
solution, can clean any type of flooring. As it advances, it also collects any
removed dirt as well as the detergent solution not absorbed by the floor.
The machine must only be used for this purpose. Even the best
machines will only work well if used correctly and kept in good working
order. We therefore suggest you read this instruction booklet carefully and
read it again whenever difficulties arise while using the machine. If
necessary, remember that our customer assistance service (organised in
collaboration with our dealers) is always available for advice or direct
intervention.

Intended use

The scrubbing machine is designed exclusively for the professional
cleaning of surfaces and floors in industrial, commercial and public
environments. The machine is only suitable for use in closed (or at least
covered) places.
The machine is not suitable for use in the rain, or under water jets. It is
FORBIDDEN to use the machine in places with a potentially explosive
atmosphere, for picking up dangerous dusts or inflammable liquids. In
addition, it is not suitable as a means of transport for people or objects.

TECHNICAL DESCRIPTION

UM SIMPLA 50 B SIMPLA 50 BT SIMPLA 50 E
4