Custom Gobos - Elation Proteus Lucius User Manual

C U S T O M G O B O S
ROTATING WHEEL1 GOBOS - Pos. 1-5:
Gobo Holder Diameter
Gobo O.D. (Max. Outer Diameter) Ø33.8mm
Gobo I.D. (Max. Image Diameter)
Gobo Thickness
Gobo Material
Pos. 1 - Pos. 5
5.01.02.01.0685-0
Pos. 1 - Pos. 5
Proteus Lucius utilizes different size gobo holders on every wheel.
Please be aware of the intended position and correct sizing requirements of custom gobos.
* * * IMPORTANT NOTICE REGARDING CUSTOM GOBOS * * *
Due to the high temperature optical system, special glass material is required for custom gobos.
Due to varying manufacturing processes and tolerances, it is highly recommended to provide a
gobo sample and holder from the fixture to the custom gobo vendor for accurate sizing. Extended
testing of custom gobo designs is highly recommended prior to use. Contact ELATION SERVICE for
further information.
ELATION SERVICE USA -Monday -Friday 8:00am to 4:30pm PST
323-582-3322 | Fax 323-832-9142 | support@elationlighting.com
ELATION SERVICE EUROPE -Monday -Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 54685 96 | support@elationlighting.eu
Ø34mm
Ø21mm
1.1mm±0.1mm
CORNING
ROTATING WHEEL1 GOBOS
1.1mm
21mm
Ø
Thickness
Image
33.8mm
Ø
Corning
ROTATING WHEEL1 GOBO HOLDERS
Ø49mm
5.8mm
Ø32mm
ROTATING WHEEL1 GOBOS - Pos. 6:
Gobo Holder Diameter
Gobo O.D. (Max. Outer Diameter) Ø34mm
Gobo I.D. (Max. Image Diameter)
Gobo Thickness
Gobo Material
5.01.02.01.0599-0
11
Ø34mm
Ø21mm
2.5mm±0.1mm
GLASS
2.5mm
Thickness
34mm
Ø
Glass
Pos. 6
Ø49mm
5.8mm
Ø32mm
Pos. 6