Custom Gobos - Elation ARISTE MONET EAM990 User Manual

CUSTOM GOBOS

* * * IMPORTANT NOTICE REGARDING CUSTOM GOBOS * * *
Due to the high temperature optical system, special material as listed above is required for custom
gobos. Due to varying manufacturing processes and tolerances, it is highly recommended to provide a
gobo sample and holder from the fixture to the custom gobo vendor for accurate sizing. Extended
testing of custom gobo designs is highly recommended prior to use. Contact ELATION SERVICE for
further information.
ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-3322 | Fax 323-832-9142 |
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
+31 45 546 85 63 | Fax +31 45 546 85 96 |
ROTATING & STATIC GLASS GOBOS - WHEEL 1 + 2
Gobo$O.D.$(Max.$Outer$Diameter)
Gobo$I.D.$(Max.$Image$Diameter)$
Gobo Holder Diameter
Gobo$Thickness$
Gobo$Material$
support@elationlighting.com
Ø 25.0 mm
GOBO MAX I.D.
Ø 29.8 mm
GOBO MAX O.D.
Ø 30.0 mm
GOBO HOLDER O.D.
support@elationlighting.eu
15
Ø 1.1 mm
THICKNESS
$ф29.8mm
ф25.0mm
$ф30.0mm
1.1mm±0.1mm
High$Temp$Glass
(Minimum$600C°)
± 0.1mm