Confer Plastics ROLLGUARD 7200 Assembly And Installation Manual page 6

STEP 4:
INSTALLING ROLLGUARD
#1: With the ladder laying on
it's side, slide the ROLLGUARD
into track, grab handle first.
#4
#7-8: Install bottom tread. IMPORTANT: this bottom tread
MUST be installed to block the track, ROLLGUARD
not come in contact with pool liner.
NOTE: Bottom tread will not be flush with ladder rail. Tread
will extend past the bottom of ladder rail.
Tools needed:
Parts needed:
®
#2-6: Slide ROLLGUARD
®
#5
rubber mallet
1- ROLLGUARD
1- Ladder tread
® around to other side of ladder.
#6
must
®
®