A-frame ladder. adjusts to fit pools 48 inch to 54 inch. ladder must be attached to pool frame - do not use with inflatable pools. swing up section of ladder must be installed on outside of pool weight limit 300 lbs. (6 pages)
Page 1
DEALER/INSTALLER: GIVE TO HOMEOWNER MODEL 635-52 ALL PLASTIC INPOOL LADDER ASSEMBLY AND INSTRUCTION MANUAL Note: 10 Lbs of sand required • 635-52 Fits Decks 46"-56" (See Step 2) • Easy Assembly • Adjustable Handrail Mounting System *Model 635-52 is a...
Page 2
CONFER PLASTICS, INC. Model #635-52 ASSEMBLY INSTRUCTIONS - PLEASE READ BEFORE ATTEMPTING ASSEMBLY Parts List Tools Needed for Assembly 2 - Handrails * Sand - 10 lbs Handrail 1 - Ladder Section * Cordless Drill Motor Adjustable * 1/8" Drill Bit...
Page 3
For winterizing in cold climates remove ladder from the pool, and drain water from ladder. ADDITIONAL ACCESSORIES IMPORTANT For #635-52 Ladder FOR YOUR SAFETY SKIM-IT Check the contents of the carton with the Parts list for this ladder. If any parts are missing call Toll Free U.S. - 866-396-2968 or visit our web site at www.conferladders.com...