Advertisement
Quick Links
Dealer/Installer: Give manual to homeowner.
Installer: Read "Safe Installation" on page #2 and all instructions before beginning. For proper assembly and
installation, instructions must be followed completely.
Homeowner: Read "Safe Use" on back cover before using. Save these instructions.
Installation must comply with local codes and may require permits.
ELIMINATOR A-FRAME LADDER
Ladder must be attached to pool frame - do not use with inflatable pools.
SWING UP SECTION OF LADDER MUST BE INSTALLED ON OUTSIDE OF POOL
ASSEMBLY, INSTALLATION AND USE MANUAL
Assembly video available online: www.conferplastics.com
The Anti-Entrapment Barrier is included in this ladder as required by ANSI/APSP requirements.
The Anti-Entrapment Barrier is NOT intended as a substitute for competent adult supervision.
If you would like to purchase the barrier, please visit our website at: www.conferladders.com
To reduce the risk of drowning, entrapment, falls, paralysis, electrocution, or
other serious injury or death:
MODEL #7000X
Adjusts to fit pools 48" to 54"
FOR RIGID-FRAMED POOLS ONLY
WEIGHT LIMIT 300 LBS.
Proudly Made in U.S.A. by
Advertisement
Related Manuals for Confer Plastics 7000X
Summary of Contents for Confer Plastics 7000X
- Page 1 Homeowner: Read "Safe Use" on back cover before using. Save these instructions. Installation must comply with local codes and may require permits. MODEL #7000X ELIMINATOR A-FRAME LADDER Adjusts to fit pools 48” to 54”...
- Page 2 LAK kit fits Confer A-frame ladders for use with non-traditional Step 3. metal framed swimming pools with a wall height of 48” - 54”. Push down rmly. Use with models: 7100b, 7100x, 7000x, 7000b, 7200 and 8100X. Not for use with inflatable pools. LAK KIT OPTIONAL CONVERSION KIT To easily convert your A-frame ladder to a deck/inpool ladder order our #CK100-X conversion kit.
- Page 3 If missing parts call - Toll free U.S. - 866-396-2968 or www.conferladders.com Step 3. Step 1. Step 2. Push down rmly. Twist and save. Pliers may be useful to aid in removal. Slide the handrail/ legs together as shown. Apply Place one handrail/leg assembly on a clean IMPORTANT: Remove the wedges from the deck plat- liquid soap or spray lubricant to aid assembly.
- Page 4 NOTE: Ladder MUST be lled with water to prevent oating. Confer Plastics Inc. warrants their swimming pool ladders and steps to be free from defects Winterizing: To winterize your ladder unfasten the ladder from the deck and pull the ladder from the in workmanship for five years from date of purchase.
Need help?
Do you have a question about the 7000X and is the answer not in the manual?
Questions and answers