A-frame ladder. adjusts to fit pools 48 inch to 54 inch. ladder must be attached to pool frame - do not use with inflatable pools. swing up section of ladder must be installed on outside of pool weight limit 300 lbs. (6 pages)
Page 1
Homeowner: Read “Safe Use” on back cover before using. Save these instructions. Installation must comply with local codes and may require permits. MODEL #8000X OUTSIDE SAFETY LADDER FOR USE ONLY WITH THE CONFER-STEP-1X. Fits 48” to 54” pools Do not use with inflatable pools.
Model #8000X Outside Safety Ladder PARTS LIST HARDWARE PACK TOOLS REQUIRED Platform FOR ASSEMBLY: Qty. Description Qty. Description Shield Handrail 2- Handrails 38- #10 x 1-1/4” Screw * Cordless Drill 2- Stringers / Legs 2- 1/4-20 x 3-1/2” * 1/8” Drill Bit...
Page 3
Step 1. Step 2. Secure the uppermost Tread Lugs Two sets of Lug locations tread only to are provided on each of the stringers stringers. Slide the four treads into the upper set of lugs on Stringers each of the stringers. Using a Phillips screwdriver or cordless Tread Lugs drill, secure the uppermost...
Page 4
Step-1X into swimming pool, refer to separate blocks to Confer Step-1X instructions. Step top step With the Step-1X in position install the 8000X ladder by before securing sliding the shields down over the step handrail posts the 8000X and the ladder rails down over the adjustable tubes.
Closing and CONFER PLASTICS INC. Opening Ladder FIVE YEAR WARRANTY Confer Plastics Inc. warrants their swimming pool ladders and steps to be To Use Ladder: free from defects in workmanship for five years from date of purchase. Move “swing up”...
Need help?
Do you have a question about the 8000X and is the answer not in the manual?
Questions and answers