A-frame ladder. adjusts to fit pools 48 inch to 54 inch. ladder must be attached to pool frame - do not use with inflatable pools. swing up section of ladder must be installed on outside of pool weight limit 300 lbs. (6 pages)
Page 1
Installation must comply with local codes and may require permits. MODEL #8100X OUTSIDE SAFETY LADDER FOR USE WITH CONFER PLASTICS IN POOL STEPS Adjusts to fit pools 48” to 54” Ladder must be attached to pool frame - do not use with inflatable pools.
8100X-11-13_Confer 6100_12-05_R1 11/22/13 9:15 AM Page 2 Outside Safety Ladder Model #8100X Model #8100X Outside Safety Ladder Ladder must be attached to pool frame - DO NOT USE with inflatable pools If missing parts call - Toll free U.S./Canada - 800-635-3213 or www.conferladders.com...
Page 3
Using two 1/4-20 x 2” long bolts and Slide (4) four of the swing up treads prpd.RG-Confer 8100X-11-13_Confer 6100_12-05_R1 11/22/13 9:15 AM Page 3 over the ladder legs as shown. two acorn nuts fasten the extension boots to the ladder legs...
Page 4
Repeat for opposite side. prpd.RG-Confer 8100X-11-13_Confer 6100_12-05_R1 11/22/13 9:15 AM Page 4 If your Confer pool step is not in If your Confer pool step is the pool follow the step not in the pool follow the step instructions and place in pool.
Page 5
” Place area With the step in location place your 8100x ladder over the With the ladder in place and platform resting on pool ledge pool wall. Depending on the outside height of swimming extend the adjustable tubes down until the mounting pool ledge extension boots can be removed or slid up or blocks are resting on the top tread of pool step.
Page 6
Unfasten the ladder from pool top seat and pool step and remove. To reinstall, see Step #20. CONFER PLASTICS INC. FIVE YEAR WARRANTY Confer Plastics Inc. warrants their swimming pool ladders and steps to be free from defects in workmanship for five years from date of purchase. DO NOT RETURN DEFECTIVE PART TO DEALER E-MAIL CONFER PLASTICS AT: LADDERS@CONFERPLASTICS.COM...