Eaton i-on Series Engineering Manual page 57

When triggered in the unset condition, only internal sounders operate. When
triggered in the set condition, the alarm response determines whether external
sounders, strobe and communications also respond to the alarm.
This zone type is not available for radio zones.
Perimeter PZ (25)
This zone type intended to be used with external (perimeter) detection equipment. PZ
Unset Response (see page 75) and PZ Set Response (page 76) determine the
response to activations of the zone.
A Perimeter zone or the zone's tamper does not contribute to a burg or confirmed
alarm.
Partitions
You can use this menu in a partitioned system to assign the zone to one or more
partitions. By default, zones belong only to partition 1.
Note:
 This menu does not appear if the zone type is Not Used or you are not using a
partitioned system.
 Any zone other than whose type is Not Used must be assigned to at least one
partition.
 If you assign a zone to more than one partition, that zone will be set only when all
the partitions it belongs to are set.
Press  or  to scroll through the list of partitions followed by  or  to assign/de-
assign the zone to each partition as necessary.
An All Partitions option is available if the zone type allows the zone to belong to more than
one partition (see the Table 9). You can use All Partitions to assign or de-assign the zone
to or from all partitions.
Table 9: Zone types that can belong to one or more partitions
One partition only
01 HUA
02 Fire
04 24 Hr
07 Technical
10 Tamper
11 External PSU AC fail
12 External PSU Battery fault
13 External PSU Low Volts
14 External PSU Fault
15 External Warning Device Fault
16 Hold Up Device Fault
24 Tamper Return
Attributes
Table 10 shows the zone attributes and the zone types they apply to. You can assign more
than one attribute to a zone. Some attributes may be unavailable for radio zones. The
display shows only the available attributes for the zone type you select.
Detectors/Devices Menu
Any partition
03 Normal Alarm
05 Final Exit
06 Entry Route
08 Key Switch Momentary
09 Key Switch Latched
17 Log Only
18 Exit Terminate
19 Shunt Key Latched
20 Shunt Key Non Latching
21 Lock Set
23 Security
22 Occupancy
25 Perimeter
Page 47