Advertisement
Step 13
Insert a SLIDE CAM (MM) into the DRAWER
å
SIDES (D28 and D29).
Fasten a DRAWER RIGHT (35GC) to the DRAWER RIGHT
å
SIDE (D28) and a DRAWER LEFT (35GD) to the DRAWER
LEFT SIDE (D29). Use four GOLD 5/16" FLAT HEAD
SCREWS (WW) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through
å
the slotted hole in the SLIDE.
Push the FILE GLIDES (15B) onto the top edges of the
å
DRAWER SIDES (D28 and D29).
Repeat this step for the remaining drawer.
å
Roller end
1
2
3
MM
15B
D29
WW
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
MM
15B
D28
2
3
Roller end
1
Page 17
Advertisement
