Related Manuals for Teknik Barrister Home Credenza 5421458
Summary of Contents for Teknik Barrister Home Credenza 5421458
- Page 1 Teknik www.teknikoffice.co.uk Your center of attention. Credenza Barrister Home Collection | Model 5421458 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-22 Straight Edge Screwdriver Safety Skip the power trip. This time. WARNING Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or death.
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. RIGHT END (1) TOP (1) BACK (2)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. HIDDEN CAM - 2 CAM SCREW - 2 WOOD DOWEL - 4 STOP BRACKET - 4 KNOB - 4 CAM COVER CARD - 1 DOOR GLIDE - 4 BLACK SCREW - 4 WARNING LABEL - 1...
- Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push two HIDDEN CAMS (1) into the UPRIGHT (C). å Turn two CAM SCREWS (2) into the TOP (F). å...
- Page 6 Step 2 Stand the UPPER BOTTOM FRAME (I) onto its long edge as shown. å Slide three LEGS (L) through the holes in the UPPER BOTTOM å Some assembly FRAME (I) as shown in the upper diagram. (and snacks) required. Fasten the LEGS (L) to the UPPER BOTTOM FRAME (I).
- Page 7 Step 3 Fasten a BOTTOM (E) to the UPPER BOTTOM FRAME (I). å Caution Use twelve BLACK 1/2" LARGE PAN HEAD SCREWS (14) through the tabs on the UPPER BOTTOM FRAME and Do not stand the unit upright without the into the holes in the BOTTOM.
- Page 8 Step 4 Fasten the BOTTOM FRAME (J) to the remaining å BOTTOM (E). Use twelve BLACK 1/2" LARGE PAN HEAD SCREWS (14) through the tabs on the BOTTOM FRAME and into the holes in the BOTTOM. BLACK 1/2" LARGE PAN HEAD SCREW (12 used in this step) The tab is closer to this edge.
- Page 9 Step 5 Slide the BOTTOM FRAME (J) onto the LEGS (L). å Fasten the LEGS (L) to the BOTTOM FRAME (J). Use six å BLACK 1/2" FLAT HEAD SCREWS (13). The holes should be closer to this edge. BLACK 1/2" FLAT HEAD SCREW (6 used in this step) Page 9...
- Page 10 Step 6 Fasten the STOP BRACKETS (4) to the ENDS (A å and B) exactly as shown. Use four BLACK 1/2" SMALL PAN HEAD SCREWS (15). Fasten the DOOR GLIDES (6) to the ENDS (A and B) å exactly as shown. Use four BLACK 7/8" WAFER HEAD SCREWS (12).
- Page 11 Step 7 Insert four WOOD DOWELS (3) into the edges of the å UPRIGHT (C) as shown. Fasten the STOP BRACKET (4) to the UPRIGHT (C). Use å two BLACK 1/2" SMALL PAN HEAD SCREWS (15). Fasten the DOOR GLIDE (6) to the UPRIGHT (C). Use two å...
- Page 12 Step 8 Fasten the SHELF FRAME (H) to the SHELF (D). Use å twelve BLACK 1/2" LARGE PAN HEAD SCREWS (14) through the tabs on the SHELF FRAME and into the holes in the SHELF. BLACK 1/2" LARGE PAN HEAD SCREW (12 used in this step) The tab is closer to this edge.
- Page 13 Step 9 Fasten the ENDS (A and B) to the SHELF FRAME (H) å exactly as shown. Use four BLACK 2-1/4" PAN HEAD Now might be a SCREWS (10). good time to refresh your drink. Edge without STOP BRACKET Edge with holes Edge without STOP BRACKET BLACK 2-1/4"...
- Page 14 Step 10 Slide the SHELF FRAME (H) assembly onto the LEGS (L). å Fasten the SHELF FRAME (H) to the LEGS (L). Use six å BLACK 1/2" FLAT HEAD SCREWS (13). Edge with holes BLACK 1/2" FLAT HEAD SCREW (6 used in this step) Page 14...
- Page 15 Step 11 Turn four BLACK SCREWS (8) into the exact holes shown å in the TOP FRAME (G). Use a Straight Edge Screwdriver. Open end Page 15...
- Page 16 Step 12 Slide the TOP FRAME (G) onto the LEGS (L). å Fasten the TOP FRAME (G) to the LEGS (L). Use six å BLACK 1/2" FLAT HEAD SCREWS (13). NOTE: Be sure the SCREWS in the TOP FRAME insert å...
- Page 17 Step 13 Unfold the BACKS (K) and lay them over your unit. å Caution Fasten the BACKS (K) to your unit using forty BLACK 1/2" å Do not stand the unit upright without the LARGE PAN HEAD SCREWS (14). BACKS fastened. The unit may collapse. NOTE: Be sure to position the BACKS exactly as shown.
- Page 18 Step 14 Carefully stand your unit upright. å Fasten the UPRIGHT (C) to the SHELF (D). Use two å BLACK 1-1/2" FLAT HEAD SCREWS (11). NOTE: Be sure the WOOD DOWELS in the UPRIGHT å insert into the holes in the SHELF. Edge with STOP BRACKET BLACK 1-1/2"...
- Page 19 Step 15 Fasten the TOP (F) to the UPRIGHT (C). Tighten two å HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the UPRIGHT insert å into the holes in the TOP. Fasten the TOP (F) to the TOP FRAME (G). Use twelve BLACK å...
- Page 20 Step 16 Fasten the KNOBS (5) to the DOORS (M). Use four å BLACK 1/2" MACHINE SCREWS (16). BLACK 1/2" MACHINE SCREW (4 used in this step) The hooks should be here. Page 20...
- Page 21 Step 17 To insert the DOORS (M) into your unit, place the hooks å on the DOORS behind the DOOR GLIDES on the Almost time to ENDS (A and B) and UPRIGHT (C). celebrate! With a nap. Hook Door Glide Page 21...
- Page 22 Step 18 NOTE: This step will show one DOOR open to view weight limit. å Apply the WARNING LABEL (9) to the TOP (F). You should be able to read the label when the TV is removed from the å unit.
- Page 23 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following safety information. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.