Related Manuals for Teknik City Centre 5426059
Summary of Contents for Teknik City Centre 5426059
- Page 1 Teknik It stands. You sit. A thing of beauty, this one. TV Stand NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. City Centre Collection | Model 5426059 PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-16 Safety WARNING Use of a TV that is too heavy or large is hazardous. A TV that is too heavy will create a risk of a tip-over that can cause severe injury or death.
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. SMALL UPRIGHT (1) RIGHT END (1) TOP (1)
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. WOOD DOWEL - 10 CAM SCREW -14 HIDDEN CAM - 14 APPLIQUE CARD - 3 L-WRENCH - 1 WARNING LABEL - 1 50 lbs. 22 kg 22 kg 22,68...
- Page 5 Hardware Usage Guide HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL NOTE: Various CAM SCREWS or a CAM DOWEL may be used. Turn the CAM SCREW or gently tap the CAM DOWEL until the shoulder is against the surface of the part.
- Page 6 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Push six HIDDEN CAMS (2) into the SHELF (B) and å SMALL UPRIGHT (A). Turn four CAM SCREWS (1) into the SHELF (B). å...
- Page 7 Step 2 Fasten the SMALL UPRIGHT (A) to the SHELF (B). Use å Caution two 1-3/8" FLAT HEAD SCREWS (7). Do not stand the unit upright without the BACK fastened. The unit may collapse. S u r f a c H I D Edge with holes D E N...
- Page 8 Step 3 Push four HIDDEN CAMS (2) into å the UPRIGHTS (C). Insert two WOOD DOWELS (3) into the å edges of the UPRIGHTS (C). Fasten the UPRIGHTS (C) to the SHELF (B). å Tighten four HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in å...
- Page 9 Step 4 Turn four CAM SCREWS (1) into the ENDS (D and E). å Push four HIDDEN CAMS (2) into the ENDS (D and E). å Arrow Arrow Page 9...
- Page 10 Step 5 Insert a WOOD DOWEL (3) into each END (D and E). å Fasten the ENDS (D and E) to the SHELF (B). Tighten four å HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the ENDS insert å into the SHELF.
- Page 11 Step 6 Insert a WOOD DOWEL (3) into each edge of the å ENDS (D and E) and UPRIGHTS (C). Fasten the BOTTOM (F) to the ENDS (D and E) and å UPRIGHTS (C). Use eight 1-3/8" FLAT HEAD SCREWS (7). NOTE: Be sure the WOOD DOWELS in the ENDS and å...
- Page 12 Step 7 Fasten the BACK (K) to the ENDS (D and E), SHELF (B), and å Caution BOTTOM (F). Use twenty-two 1/2" PAN HEAD SCREWS (9). Do not stand the unit upright without the BACK fastened. The unit may collapse. 1/2"...
- Page 13 Step 8 Fasten the LEGS (G) to the BOTTOM (F). Tighten å four 13/16" HEX HEAD SCREWS (8) using the L-WRENCH (5). NOTE: You should start each SCREW a few turns å before completely tightening any of them. 13/16" HEX HEAD SCREW (4 used in this step) Page 13...
- Page 14 Step 9 Fasten the FEET (H) to the BOTTOM (F). Use eight 1/2" å PAN HEAD SCREWS (9). Turn six CAM SCREWS (1) into the TOP (J). å 1/2" PAN HEAD SCREW (8 used in this step) Page 14...
- Page 15 Step 10 Carefully stand your unit upright. å Insert a WOOD DOWEL (3) into each END (D and E). å Fasten the TOP (J) to the SMALL UPRIGHT (A) and å ENDS (D and E). Tighten six HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the ENDS insert å...
- Page 16 Step 11 Apply the WARNING LABEL (6) to the TOP (J). You should be able to read the label when the TV is removed å from the unit. When the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
- Page 17 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following safety information. Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.