Related Manuals for Teknik Hudson 5425709
Summary of Contents for Teknik Hudson 5425709
- Page 1 Teknik www.teknikoffice.co.uk Don't get caught with your pants on the ground. Hudson 6 DrawerDresser NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. Model 5425709 PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-27 Hammer Not actual size Français 28-31 Español 32-36 Electric drill with 1/8" bit (ONLY in indicated step) Safety 37-38 Warranty...
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. Page 3...
- Page 4 Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. LARGE HIDDEN 35AA UNIVERSAL CABINET RAIL - 12 35AC DRAWER RIGHT - 6 35AD DRAWER LEFT - 6 CAM - 14 LARGE WOOD SMALL WOOD SMALL HIDDEN CAM SCREW - 44...
- Page 5 Hardware Usage Guide HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL NOTE: Various CAM SCREWS or a CAM DOWEL may be used. Turn the CAM SCREW or gently tap the CAM DOWEL until the shoulder is against the surface of the part.
- Page 6 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Fasten six UNIVERSAL CABINET RAILS* (35AA) to the å ENDS (A and B). Use twelve BLACK 3/8" FLAT HEAD SCREWS (11) through holes #1 and #3.
- Page 7 Step 2 Turn six CAM SCREWS (3) into the exact holes shown in å the ENDS (A and B). Just think. The sooner you do this, the sooner you do something else. Page 7...
- Page 8 Step 3 Fasten three UNIVERSAL CABINET RAILS* (35AA) to the å UPRIGHT (C). Use six BLACK 3/8" FLAT HEAD SCREWS (11) through holes #1 and #3. Turn a CAM SCREW (3) into the UPRIGHT (C). å *patent pending glide system å...
- Page 9 Step 4 Flip the UPRIGHT (C) over. å Fasten three UNIVERSAL CABINET RAILS* (35AA) to the å UPRIGHT (C). Use six BLACK 3/8" FLAT HEAD SCREWS (11) through holes #1 and #3. Turn a CAM SCREW (3) into the UPRIGHT (C). å...
- Page 10 Step 5 Push fourteen LARGE HIDDEN CAMS (1) into the ENDS (A å and B), UPRIGHT (C), BACKS (S and T), and BOTTOM (E). Arrow (14 used) Arrow Arrow Page 10...
- Page 11 Step 6 Insert four LARGE WOOD DOWELS (4) into the BRACE (G). å Push the SKIRTS (F) onto the LARGE WOOD DOWELS (4) in the BRACE (G). å Insert ten LARGE WOOD DOWELS (4) into the BOTTOM (E). å Push the SKIRTS (F) and BRACE (G) onto the LARGE WOOD DOWELS (4) in the BOTTOM (E). å...
- Page 12 Step 7 Turn the BOTTOM on its long edge. å Fasten the SKIRTS (F) to the BOTTOM (E). Use eight å SILVER 2" FLAT HEAD SCREWS (8). SILVER 2" FLAT HEAD SCREW (8 used in this step) Page 12...
- Page 13 Step 8 Insert four LARGE WOOD DOWELS (4) into the UPRIGHT (C). å Fasten the BACKS (S and T) to the UPRIGHT (C). Tighten two å HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the UPRIGHT insert å into the BACKS (S and T). Page 13...
- Page 14 Step 9 Insert six LARGE WOOD DOWELS (4) into the BACKS (S å and T) and UPRIGHT (C). Fasten the BOTTOM (E) to the BACKS (S and T) and å UPRIGHT (C). Use two SILVER 2" FLAT HEAD SCREWS (8). NOTE: Be sure the WOOD DOWELS in the BACKS and å...
- Page 15 Step 10 Insert sixteen LARGE WOOD DOWELS (4) into the ENDS (A and B). å Side Step: Make Fasten the RIGHT END (B) to the BOTTOM (E), SKIRTS (F), and å nachos. (Optional, but RIGHT BACK (S). Tighten three HIDDEN CAMS. recommended.) Fasten the LEFT END (A) to the BOTTOM (E), SKIRTS (F), and å...
- Page 16 Step 11 Use the FURNITURE TIPPING RESTRAINT KITS (98) for å added stability. Open the FURNITURE TIPPING RESTRAINT KITS (98) å and fasten the SAFETY STRAPS to the TOP (D). Use the provided short screws. NOTE: Position the SAFETY STRAPS exactly as shown. å...
- Page 17 Step 12 Insert six WOOD DOWELS (4) into the ENDS (A and B) and å UPRIGHT (C). Fasten the TOP (D) to the ENDS (A and B) and UPRIGHT (C). å Tighten six HIDDEN CAMS. NOTE: Be sure the WOOD DOWELS in the ENDS and å...
- Page 18 Step 13 Carefully turn your unit over onto its front edges. Lay the å BACK (U) over your unit. Push the SAFETY STRAPS through the large holes in the å BACK (U). Make equal margins along the top and side edges of the å...
- Page 19 Step 14 Push fi ve SMALL HIDDEN CAMS (2) into the DRAWER å SIDES (J and V), and BRACES (M). Repeat this step for the remaining DRAWER SIDES (J and V) å and BRACES (M). Arrow (30 used) Page 19...
- Page 20 Step 15 Turn ten CAM SCREWS (3) into the exact holes shown in å the DRAWER FRONTS (H and O). Fasten the SMALL DRAWER FRONT MOLDING (N) to the å SMALL DRAWER FRONT (H) and the LARGE DRAWER FRONT MOLDING (R) to the LARGE DRAWER FRONT (O). Use six BLACK 3/4"...
- Page 21 Step 16 Insert four SMALL WOOD DOWELS (5) into the short edges of a SMALL DRAWER BACK (K). å Fasten the DRAWER SIDES (J and V) to the SMALL DRAWER BACK (K). Use four SILVER 1-1/2" FLAT HEAD SCREWS (9). å...
- Page 22 Step 17 Insert fi ve SMALL WOOD DOWELS (5) into the short edges of the DRAWER SIDES (J and V) and DRAWER BRACE (M). å Fasten a SMALL DRAWER FRONT (H) to the DRAWER SIDES (J and V). Tighten fi ve HIDDEN CAMS. å...
- Page 23 Step 18 Insert four SMALL WOOD DOWELS (5) into the short edges of a LARGE DRAWER BACK (P). å Fasten the DRAWER SIDE (J and V) to the LARGE DRAWER BACK (P). Use four SILVER 1-1/2" FLAT HEAD SCREWS (9). å...
- Page 24 Step 19 Insert fi ve SMALL WOOD DOWELS (5) into the short edges of the DRAWER SIDES (J and V) and DRAWER BRACE (M). å Fasten a LARGE DRAWER FRONT (O) to the DRAWER SIDES (J and V) and DRAWER BRACE (M). Tighten fi ve å...
- Page 25 Step 20 Fasten a DRAWER RIGHT (35AC) to a RIGHT DRAWER SIDE (J) and the DRAWER LEFT (35AD) to a LEFT DRAWER å SIDE (V). Use four BLACK 3/8" FLAT HEAD SCREWS (11) through holes #1 and #2. NOTE: The glides are not intended to rotate. å...
- Page 26 Step 21 Carefully stand your unit upright. å To insert the drawers into your unit, tip the front of the å Almost time to drawer down and drop the glides on the drawer behind celebrate! With a nap. the glides on the unit. Lift the front of the drawer up and slide it into the unit.
- Page 27 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following safety information. Death or serious injury may occur when children climb on furniture. A remote control, toys or other items placed on the furniture may encourage a child to climb on the furniture which could cause it to tip-over and result in serious injury or death.