Komatsu PC30MR-5 Operation & Maintenance Manual page 346

HANDLE MACHINE READY FOR INSTALLATION OF ATTACHMENT
2.
Turn the fuel control dial to High idle (MAX) position, and
return it a little bit.
Set the engine output at 80 % position.
3.
Press the breaker operation switch.
The breaker operates.
CHECK POINTS WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER
ETC
• Is selector valve (1) in position (a) for general attachment
such as crusher, etc. (2 way)?
If it is not in the position (a) for general attachment such as
crusher, etc. (2 way), turn it to the position.
• When handling the general attachment such as crusher, etc., follow the instruction manual from the manu-
facturer and use the attachment correctly.
METHOD FOR OPERATING MACHINE WHEN WORKING MODE IS NOT IN ATT/P
OR ATT/E FOR ATTACHMENT
If the working mode display does not indicate the attachment mode, set it to attachment mode according to the
following procedure.
1.
Press function switch "F5" on the standard screen.
"Working Mode" screen is displayed.
6-14
WENAM00150
ATTACHMENTS AND OPTIONS