Komatsu PC30MR-5 Operation & Maintenance Manual page 173

OPERATION
1.
Adjust the mirror so that the side of the machine is reflect-
ed in the mirror as shown in the figure.
2.
Check that you can see a person at the rear left end of the
machine.
PROCEDURE FOR ADJUSTING MACHINE RIGHT FRONT MIRROR
The following conditions must be met before starting the work to prevent the machine from moving dur-
ing the work.
• The machine is placed on a level ground.
• The work equipment is lowered to the ground in secure posture.
• The lock lever is in LOCK position.
• The engine is stopped.
1.
Adjust the mirror so that the side of the machine is reflect-
ed in the mirror as shown in the figure.
2.
Check that you can see a person at the rear right of the
machine.
PROCEDURE FOR ADJUSTING MACHINE RIGHT REAR MIRROR
The following conditions must be met before starting the work to prevent the machine from moving dur-
ing the work.
• The machine is placed on a level ground.
• The work equipment is lowered to the ground in secure posture.
• The lock lever is in LOCK position.
• The engine is stopped.
Adjust it so that people at 1 m behind the machine can be seen
from the operator's seat.
(W): 1 m
MACHINE OPERATIONS AND CONTROLS
k k
CAUTION
k k
CAUTION
WENAM00150
3-107