Komatsu PC30MR-5 Operation & Maintenance Manual page 106

EXPLANATION OF COMPONENTS
1.
Select "Attachment Setting" on "Machine Setting" menu
screen, and then press function switch "F4".
2.
"Attachment Setting" screen is displayed.
Select proper setting matching to the installed attachment
on "Attachment Setting" screen, and then press function
switch "F4".
Setting of ATT/P and ATT/E mode is changed.
On "Attachment Setting" screen, you can perform the fol-
lowing operations with function switches "F1" to "F4", "F6",
and "F7".
Function switch "F1"
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
Function switch "F2"
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
Function switch "F3"
Cancels the selection and returns the screen to "Machine Setting" screen.
Function switch "F4"
Allocates the selected setting to that of ATT/P and ATT/E mode, or set it to the No Attachment.
Function switch "F6"
Changes the flow rate of the selected attachment setting.
Function switch "F7"
Changes the name of the selected attachment setting.
REMARK
When "No Attachment" is selected, ATT/P and ATT/E mode is cleared from "Working Mode" screen, and you
cannot select the mode.
Changing attachment setting name
Change the name of attachment setting after starting the engine.
You can change the name of each pattern for the attachment setting as you like.
You can use alphabet letters (A to Z), Arabic numerals (0 to 9), symbols (#, *, +, -, and /), and the blank (space).
3-40
WENAM00150
OPERATION