Winmate IP32S User Manual page 33

BIOS Setting
WBT Hook
Configuration
RC6 (Render
Standby)
GTT Size
Apperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Cd Clock Frequency
GT PM Support
PAVP Enable
Description
WBT Hook Configuration
Check to enable render
standby support, R6C should
be enabled if S0ix is enabled.
Select the GTT size.
Select the Aperture size.
Select DVMT Pre-Allocated.
Select DVMT Total Gfx Mem.
Select Cd Clock Frequency.
Configure GT PM Support
settings.
Enable/ Disable PAVP
Chapter 3: Insyde H20 BIOS Setup
Setting Option Effect
Enabled/ Disabled Enable/ Disabled
WBT Hook
Enabled/ Disabled Enable/ Disabled
RC6 (Render RC6 (Render
Standby) Standby)
2 MB/ 4 MB/ 8 MB Select the GTT
size.
256 MB Select the Aperture
size.
64 M/ 96 M/ 128M/ Select DVMT 5.0
160M / 192M/ Pre-Allocated
224M/ 256M/ (Fixed) Graphics
288M/ 320M/ Memory size used
352M/ 384M/ by the Internal
416M/ 448M/ Graphics Device.
480M/ 512M
Select DVMT 5.0
128M/ 256 M/ MAX
total memory size
used by the
Internal Graphics
Device.
144 MHz/ 288 MHz/ Select the highest
384MHz/ 576MHz/ Cd Clock
624 MHz frequency
supported by the
platform
Enabled/ Disabled Enable/ Disable
GT PM Support
Enabled/ Disabled Enable/ Disable
PAVP
33