How And When To Use Bios Setup - Winmate IP32S User Manual

28 IP32S 3.5" SBC User Manual

3.1 How and When to Use BIOS Setup

To enter the BIOS setup, you need to connect an external USB keyboard, external monitor and press
Del key when the prompt appears on the screen during start up. The prompt screen shows only few
seconds so need press Del key quickly.
Important: Updated BIOS version may be published after the manual released. Check
the latest version of BIOS on the website.
You may need to run BIOS setup utility for reasons listed below:
1. Error message on screen indicates to check BIOS setup
2. Restoring the factory default settings.
3. Modifying the specific hardware specifications
4. Necessity to optimize specifications
BIOS Navigation Keys
The following keys are enabled during POST:
Key Function
Enters the BIOS setup menu.
Del
F7 Display the boot menu. Lists all bootable devices that are connected to the system. With
cursor ↑and cursor ↓and by pressing <ENTER>, select the device used for the boot.
Pause Pressing the [Pause] key stops the POST. Press any other key to resume the POST.
The following Keys can be used after entering the BIOS Setup.
Key Function
F1 Help
F5/ F6 Change Values
F9 Setup Defaults
F10 Save & Exit
Esc Exit
Enter Select SubMenu
↑/ ↓
Select Item
← / →
Select Item
For items marked ► press <Enter> for more options.
Note:
You can press the F1, F2, F3, F4, –/+, and Esc keys by connecting a USB keyboard to
your computer.