How And When To Use Bios Setup - Winmate IK32 User Manual

USER MANUAL
CHAPTER 3: INSYDE H20 BIOS SETUP
This chapter provides information on how to use BIOS setup, its functions and
menu.

3.1 How and When to Use BIOS Setup

To enter the BIOS setup, you need to connect an external USB keyboard, external
monitor and press Del key when the prompt appears on the screen during start up.
The prompt screen shows only few seconds so need press Del key quickly.
IMPORTANT:
Updated BIOS version may be published after the manual
released. Check the latest version of BIOS on the website.
You may need to run BIOS setup utility for reasons listed below:
1. Error message on screen indicates to check BIOS setup
2. Restoring the factory default settings.
3. Modifying the specific hardware specifications
4. Necessity to optimize specifications
BIOS Navigation Keys
The following keys are enabled during POST:
Key Function
Del Enters the BIOS setup menu.
F7 Display the boot menu. Lists all bootable devices that are
connected to the system. With cursor ↑and cursor ↓and by pressing
<ENTER>, select the device used for the boot.
Pause Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
CHAPTER 3
- 32 -
INSYDE H20 BIOS SETUP