Nice WIDE M Installer's Instructions page 25

Receiver Setup
From Standby status
Action
To enter the program
menu. Press and hold the
 button until buzzer
beeps.
Scroll < or > to select the
receiver setup option.
With "Receiver Setup"
on the display, press and
release .
Scroll < or > to select the
Receiver info option.
With "Receiver info" on the
display, press and release
.
Press and release X to exit
back to receiver setup
options.
Scroll left or right to next
program option.
Receiver programming and setup.
Receiver information.
- "Selected" mode -
The barrier can be in any position when performing this routine.
- Standby
Description
Programming menu
Display and buzzer
confirms.
<or> for options
Receiver Setup
Display scrolls
through options. <  = change >
Display shows
Receiver Setup
receiver setup
Quick learn
options.
Receiver Setup
Display changes
respectively. Receiver info
Display begins
Receiver Info
toggling between
used: 1 of 1023
the number of user
-----------------------
addresses used out of
Receiver Info
the total memory and
Software ver: 2
the software version.
Display changes back
Receiver Setup
to main receiver
setup options level Receiver info
and buzzer beeps.
EXIT back to standby
OR
status
25
Response
Display Buzzer
x2
x1
Barrier
"Selected" mode
- Standby