Nortel Meridian 1 Option 11C Manual page 30

1.5 mb dti/pri
Hide thumbs Also See for Meridian 1 Option 11C:
Table of Contents

Advertisement

Page 30 of 100
PRI Implementation
Prompt
- DRAT
- SIDE
- RLS
- RCAP
- OVLR
- LAPD
- - T23
- - T200
- - N200
- - N201
- - K
553-3011-310
Standard 13.00
Response
64KC
NET (USR)
XX
ND2
<CR>
YES (NO)
1-(20)-31
2-(3)-40
1-(3)-8
4(260)
1-(7)-32
January 2002
Description
D-channel transmission rate.
Prompted only if IFC is set to SL1.
NET = network, the controlling switch.
USR = slave to the controller.
X11 software release of far-end. This is the current
software release of the far end. If the far end has an
incompatible release of software, it prevents the sending
of application messages, i.e. for Network Ring Again.
Remote capability.
Allow or disallow overlap receiving on a D-channel.
Default is NO.
Change LAPD parameters. Enter carriage return if
timers are to be left at default. The following timers are
prompted only if LAPD is set to YES. (They can all be
left at default during initial set-up.)
Interface guard timer checks how long the interface
takes to respond. In units of 0.5 seconds (default 20 = 10
seconds).
Retransmission timer in units of 0.5 seconds
(default 3 = 1.5 seconds).
Maximum number of retransmissions.
Maximum number of octets in information field.
Maximum number of outstanding unacknowledged
frames (NAKS).

Advertisement

Table of Contents
loading

Table of Contents