Nortel Meridian 1 Option 11C Manual page 33

Prompt Response
DTRK YES
- DGTP PRI
ISDN YES
- MODE PRA
- - PNI (0) 1-32700
IFC xx
- CHTY BCH
- CTYP <CR>
- INAC YES
PRI Implementation
Description
Digital trunk route
1.5 Mb PRI. Prompted only if PRA = YES in LD15.
ISDN option
Route used for PRI only
Private Network Identifier. Each customer data block
must have a unique PNI when multi-customer option is
equipped. PNI = 1 is typical for CUST = 0. It must be
matched by the PNI in the far-end RDB.
Note: using the default value of PNI = 0, prevents
operation of features like NRAG, NACD and NMS.
Interface type.
Signalling type - prompted if DTRK is YES. D-channel
signalling for B-channels.
Call Type. Enter the call type to be associated with the
outgoing route for direct dialing using the trunk access
code (instead of NARS access code).
Administration
See the
possible responses.
Insert ESN Access Code based on NARS/BARS call
type, for incoming calls on TIE routes only. If NARS is
equipped, this feature inserts AC1 or AC2, depending
on the responses to AC2 in LD 15 Customer Data
Block.
For NARS/BARS call types, INAC bypasses incoming
digit insertion specified by INST in LD 16 Route Data
Block.
Unknown call types, including CDP steering codes, are
not affected by INAC, and do not bypass digit insertion
specified by INST.
INAC must be set to YES to support features such as
Network ACD and Network Message Services, which
depend on non-call associated TCAP facility messages.
Page 33 of 100
(553-3001-311) for a listing of
Option 11C 1.5 Mb DTI/PRI