Mount The Ntak93 Or Ntbk51 Daughterboard On The Ntak09 - Nortel Meridian 1 Option 11C Manual

Figure 3
NTAK20 Daughterboard installation

Mount the NTAK93 or NTBK51 daughterboard on the NTAK09

Stiffeners
1 2 3 4
ON
SW
LEDs
Bantam
Jacks
Mount the NTAK93 DCHI or NTBK51 DDCH daughterboard before the
NTAK20 daughterboard. Work on a flat surface when mounting or removing
daughterboards.
1 Visually inspect the connector pins on the underside of the
daughterboard. Any pins that are bent should be re-aligned prior to
mounting.
2 Place the NTAK09 down flat on an anti-static pad.
PRI Implementation
Connector Socket
Option 11C
Page 21 of 100
Connector Pins
NTAK20
Clock
Controller
Mounting Holes
Standoffs
553-9024
1.5 Mb DTI/PRI