Nortel Meridian 1 Option 11C Manual page 90

Page 90 of 100 ISL Implementation
DTRK
ISDN
MODE
DCHI
PNI
IFC
CTYP
INAC
LD 14 – Assign a channel identification to each trunk with the ISL option.
Prompt
REQ:
TYPE
TN
RTMB
CHID
553-3011-310 Standard 13.00
YES/NO
YES
ISLD
XX
1-32700
SLl
<CR>
YES
Response
NEW
CHG
TIE
CC UU
RRR MMM
1-192
January 2002
Enter YES if this is a Digital Trunk Interface (DTI or PRI)
ISDN option
Route for ISL application
DCHI port no. in CFN which will carry the D-channel for
this TIE trunk route.
Customer private network identifier-must be the same
as the CDB PNI at the far end.
Interface type
Select Meridian 1 to Meridian 1
Call Type. Enter the call type to be associated with the
outgoing route for direct dialing using the trunk access
code (instead of NARS access code) See the X11
System Messages Guide (553-3001-411) for a list of
valid responses
Insert Access Code. Permits the NARS AC1 or AC2
access code to be re-inserted automatically on an
incoming ESN call.
Description
Add new data
Change existing data
TIE trunk type
Card (CC) and Unit (UU) to be associated with this
trunk data
Route (created in step 3) (RRR) and member number
(MMM)
Channel identifier for ISL channels (remove with
Xnn)—must be coordinated with far end (no default
value)